Integration of fume hood body: full steel cabinet put oneself in another's position, high quality galvanized steel 1.2 mm thick, adopting the pickling phosphating corrosion, surface for EPOXY powder electrostatic spraying EPOXY resin processing, acid and alkali and rust prevention.
2. The flow guide plate: use grey pirelli board, 6 mm thick, the structure is higher, the proportion of different gases emissions effectively.
3. The operation table: use 12.7 mm thick, solid core brand chemical corrosion resistance, waterproof, resistant to high temperature (140 ℃), peripheral thickening processing, to prevent water droplets into the cabinet put oneself in another's position, easy to clean and maintain. Optional according to need PP/epoxy resin/stainless steel/ceramic mesa, can meet the needs of different USES.
4. The back board: use grey pirelli board (6 mm thick.
5. Top plate: use grey pirelli board, 6 mm thick, the structure of explosion pressure relief effect.
6. Depending on the window: use 5 mm thick safe explosion-proof glass combination with balance, the balance part is gratuitous type structure design, operating glass door design push-pull, left, right upper and lower open, flexible operating procedures, is safe to complete special experiment.
7. According to Ming: using 40 w explosion-proof fluorescent lamp is one branch of hidden on the roof (not less than 300 lx illumination), do not contact with ventilation airflow inside ark, easy replacement, and at the top of the soft connection effect on explosion have reduced pressure to release.
8 meter table board: the touch button type microelectronic control panel, protection device, power supply, motor, electrical outlet, lighting, such as leakage, overload, short circuit fault protection.
9. Distribution: with the faucet and PP small glass, also can choose remote control water valve and water nozzle; At the same time according to need to configure the remote control valve and the mouth.
Fans: 10. Convulsions system according to actual use require the use of domestically produced corrosion resistance of PP fan, the noise is less than 65 dba; Wind field condition using PP duct, straight row of the wall or to the designated location.
11. Rules: the wind ark installation dimensions: width: 1200 mm and 1500 mm and 1800 mm; Deep: 850 mm; Height: 2350 mm; Internal use must be 650 mm or more in depth, in order to place larger instruments.
Rules: wind ark installation dimensions for: width: 1200 mm and 1500 mm and 1800 mm; Deep: 850 mm; Height: 2350 mm; Internal use must be 650 mm or more in depth, in order to place larger instruments.
Integration of tank body: full steel cabinet put oneself in another's position, use the 1.2 mm thick high quality cold-rolled steel plate, the acid pickling phosphating anti-corrosion, surface for EPOXY powder electrostatic spraying EPOXY resin processing, acid and alkali and rust prevention.
Common collocation instrument