SUS 304 Stainless Steel Tunnel Uv Sterilizer / Cereals Uv Sterilizer / Uv Sterilizing
Machine for Herbs
UV sterilizer specifications:
1. Product name: UV UV sterilizer.
Model: HT - UV - 2000
This equipment is widely used in product processing and packaging sterilization and so on.
2. Main dimensions of equipment.
1. Length of equipment: 2000 mm.
2. Sterilization area: 1200 mm.
3. Product inlet area: 400 mm.
Product outlet area: 400 mm.
4. Inlet height: 180 mm (adjustable)
5. Width of inlet and outlet network: 500 mm.
6. Conveyor belt is from the ground: 750 plus or minus 20mm.
Iii. Equipment main structure.
1. External body of the working area: 1.2mm high temperature electrostatic spraying on the surface of the whole machine (no ordinary spray oil) (model: A3)
2. Working area tunnel: 1.1mm 304 high quality stainless steel plate (model: #212)
3. Body support frame: one set of fangtong steel (model: 2 square steel)
4. Air transport system: a set of forced air combination exhaust fan (extract harmful gas) (model: SANGJING)
5. Conveyor belt: teflon conveyor belt.
6. Conveying drum: clean and friction-resistant roller.
7. Import and export baffle (2 sets): the heating zone is adopted with a temperature-adjusting plate, which is large according to the specific size of the dry material.
Small adjustment, adjustable range of 150MM.
8. Transmission power (1 set) : safety booster motor with a converter, the delivery speed is 0-5m /MIN as required by production.
9. Bearing beam (2), balancing device: flat water foot cup (model: 50*12*100mm)
4. Equipment and electrical parts.
1. Inorganic speed range of mesh belt: 0-5m/min.
2. Transportation motor: 800W (speed adjustment of frequency converter)
3. Governor: 500W (stepless speed regulation)
4. Suction fan: cy-125.
5. Ammeter: 20A,
Total power: 2.5kw.
6. Working voltage: 220V(plus or minus 5)- single phase three-wire system /50Hz.
V. UV sterilization parts:
1. Bactericidal lamp tube light source part: 1200 mm, with 16 sets of 20W imported philips ultraviolet sterilization special lamp tube.Evenly distributed in the furnace up and down 5 branches, left and right 3, with UV reflective device (inner mirror stainless steel plate),
The utilization rate of ultraviolet light can be up to 95% (the sterilization time is about 4 minutes).
2. The sterilizing zone has a light zone, a hood and adjustable baffle.
The shell is made of steel plate spray paint, and the whole machine is easy to clean.
The bottom is equipped with four brakes to move the caster.
3. Transmission part: adopt Taiwan yongkun 120W non-pole speed regulating motor to adjust the speed, and display the speed of the infinitely variable speed and linear speed.
Table, the number of digital display, the speed is even 0-5 meters per minute adjustable.
(1) it adopts the special imported advanced teflon net belt transmission, with a dragboard in the middle. It is equipped with adjustable active and passive roller before and after, which is good for the net belt to be hard to run and to damage its mesh belt.
(2) the sterilizing lamp of each group can be controlled independently, and the adjustment device of adjustable UV lamp tube Angle can be increased, the length of the lamp tube is 600mm, the wavelength is 253.7mm, and the sterilization rate can reach 99.99%.
Equipped with automatic timer, it can monitor the use time of the lamp tube at any time to facilitate the replacement of the lamp tube.
If the product is to fall residue class, can use the tray to put on the conveyor belt to sterilize.
Vi. Protection device.
1. Overpressure protection.
2. Failure warning prompt.
3. Equipment overload protection.
Kill the bacteria and the number
Type name 100% kill required time (seconds) type name 100% kill time (seconds)
Bacillus anthracis 90.
Class influenza virus 180.
Bacillus tetanus 83 phagocytovirus 160.
Dysentery bacillus 62 rotavirus 160.
E. coli 94 HBV 210.
Yeast 70 aike virus 173.
Salmonella is 98 water.
Blue-green algae 213.
Shigella is a 75 - line worm egg 101.
Subaspergillus 105 paramecium is 131.
The 99 protozoa of the coprolites is 126.
Black aspergillus 78
The disease is leukaemia 205.
Viral haemorrhagic disease 179.
(all 360 ℃) sterilization
UV sterilizer configuration list.
Description of serial number equipment name specification.
A linear body drive and tensioning system:
1.Conveyor type: continuous tunnel conveyor.
2. Conveyor belt: imported advanced PVC mesh belt.
3.Frame: 50*50 square surface spray painting.
4. Drive power: the permanent force horizontal booster motor with 1:80 power is installed under the nose.
5.Speed adjustment: special custom converter model (SANJING)
6.Automatic tensioning device for mesh belt: spiral tension type.
Secondary sterilization zone
1. Appropriate UV UV sterilizing lamp tube for each segment.
2. The top assembly vertical motor (Taiwan FUAN) torsional wind turbine for hot air circulation.
3. Configuration maintenance: each section has maintenance handle to facilitate maintenance and prevent the internal product from getting stuck.
1.Temperature controller KTYB809 (Taiwan)
2.Overtemperature protection instrument Japan RKC, voltmeter, ammeter.
3.Temperature sensor PT100.
4.Contact Taiwan shilin.
5.Overheat relay taian Taiwan.
6.Intermediate relay omron Japan.
7.Terminal row NIM (Japan)
8.Sound and light alarm taian (Taiwan)
9.The heater protects zhengtai.
Technical parameter of uv sterilizing machine for herbs :
|Electric voltage||220 v / 50 to 60 hz (can be scheduled special voltage) |
|Sterilization time||within a few seconds|
|How to sterilize||4 sides to sterilize product|
|Light source parts||16 sets of 40w uv sterilization special tube|
|Conveyor belts width ||700mm|
|Machine weight ||300kg|
|Material||304 stainless steel|